Refinishing an Oak Pedestal Game Table... {Part 4}

Part 4 of our table refinish demonstrates how I refinished the base of our pedestal table. You will remember that when we bought the table it looked like this...

It definitely had a yellow tinge to it. It was not very attractive, but it had a ton of potential and the price {$50} was just right.

In earlier posts I demonstrated the stripping process (Part 1), the staining process (Part 2), and the finishing process of the table top (Part 3).  In this post I will show how I refinished the base or pedestal of the table.

I decided early on that I wanted to paint the bottom of the table. I love the look of two-toned furniture items, so this seemed like a given. Plus, stripping a flat surface is relatively easy, but stripping a curved surface {the rounded pedestal} is harder. I like easy. I chose the color black for the base, but I considered white, off-white, or gray. Any of those would have been lovely.

It's much easier painting an item rather than stripping an item and re-staining it. One doesn't have to go through the stripping process if you are going to use paint. I lightly sanded the bottom of the table with an orbital sander and by hand and that was it. The object of the sanding is to rough up the surface a smidge so the paint will adhere nicely. I didn't use wood filler in any of the scratch marks or imperfections because I love those. It shows the table had a life before us and was well-loved. I bought a black satin spray paint with a primer built-in. Make sure you use a paint with a primer. A primer will seal the original material so the paint doesn't soak into it, requiring extra coats. Another tip -- buy a Spray Can Grip Accessory. It is so much easier to get a nice, even spray with one of these.  Your furniture will look much more like it was professionally painted!

Also, if you want a nice drip free project, spray on several light coats, rather than heavy coats, thus avoiding running or dripping paint. Do you see the image below? The arrow points to a spot that was not fully covered by the first coat of paint. That's a good thing. Several light coats will give you a much better result than one heavy one.

Here is the base of the table after three coats of black primer and paint. This was right after I painted it so it looks a little glossy.

I used a coat of Varathane Clear Satin Oil-Based Spar Urethane Spray to finish it. This particular urethane is self leveling and gave the base a gorgeous satin finish. Plus, it's hard as nails.

When that was completed all we did was screw on the casters. My heart did a pitter-patter when we added these. So beautiful...

We haven't actually screwed the top of the table to the base yet, and the rug that will be placed beneath it hasn't arrived, but here's a sneak peak at the finished project. Oh... I also have to assemble the chairs, so there will be be a Part 5 to this adventure in the near future, until then...

Have a wonderful week!

Refinishing an Oak Pedestal Game Table... {Part 3}

When I last posted I had added the first of three coats of satin Spar Urethane {I use oil based} on the top of the oak pedestal game table I am refinishing.

I let that first coat dry for 24 hours, then lightly sanded the top by hand with 220 sanding paper, wiped off the table with a wet wipe, let it dry thoroughly, and added another coat of urethane. I use a brush when I apply urethane. A roller will leave little bubbles. Urethane is self-leveling so brush strokes will flatten as it dries. I went through that process one more time of adding urethane -- for a total of three coats -- before I decided the top coat was about as good as it could get. Then I used some grade 0000 steel wool and lightly "sanded" it. This will take off dust particles and leave your table top looking and feeling smooth to the touch...

Finally, I added one more step that I've never done before. I cut out a round piece of  terry cloth from an old towel and placed it under my orbital sander. Then I buffed up the table to a beautiful shine. I use a satin finish in the urethane which leaves you with a soft sheen. So pretty!

I also prepared the base of the table over the weekend by lightly sanding it. I'm going to spray paint the pedestal with a black satin primer and paint in one. You just need to rough up the surface of the item enough that the paint will adhere easily. I like using spray paint on furniture. It gets into nooks and crannies and doesn't leave brush strokes. Plus, it's so much faster! The only thing you need to worry about is putting on several light coats, rather than heavy coats, so the spray paint doesn't run.

I'd found early on that one of the casters the table rests on kept coming out. When I turned the table over to examine the casters, this is what I found...

In the first place those are so grungy they make me shiver, but, aside from that, not one of these casters matched! No wonder the table was a little wobbly. I bought four of these new "antique" casters. Hopefully, these will give us a level table...

I plan on painting the base pedestal in the next couple of days. I'm so excited to get this table finished and placed in our loft, so I can start beating my husband at Uno. {Rarely, if ever, happens.}

Wishing you a sun-filled week...

Refinishing an Oak Pedestal Game Table... {Part 2}

See Refinishing an Oak Pedestal Game Table... {Part 1}

This post is for the novice furniture refinisher and it's about putting perfectionism aside when working with wood. When I sew I am careful to precisely line up seams and sew with precision in order to make a project look more “professional," however, I have to remind myself when I’m working with wood that it is a “living” product and to appreciate its not-so-perfect nature. Because wood is a porous, fibrous, organic material, it is filled with imperfections and unique characteristics. It's those unique characteristics that make wood beautiful. Sometimes I have to remember this when refinishing a piece of furniture. In all of the furniture I've refinished no two pieces have reacted the same way to the refinishing process. You can look at it as frustrating or a challenge depending on your outlook. Here's an example of the table I'm currently working on...

 Do you see in the photo above those little arrows pointing to the lighter wood grain lines going across the tabletop? Also...

...in the photo above the tabletop took the stain darker in the area where the arrows are pointing.  These differences could be because you applied the stain unevenly, but I'm very careful about the process of applying stain these days because I had a disastrous fail once when I wasn't so careful. (Go here for that post.) When the urethane is applied the differences are made even more obvious. Sometimes when I see things like this -- especially the difference in stain -- it irks the perfectionist in me, but I've learned to let it go. You'll never notice it once the furniture is situated in your home. 

This tabletop is so different than any other wood I've worked with. It might be the quarter sawn wood. In any case this is the craziness that was revealed in the wood when I put the first coat of urethane on it...

I might add that the wood looks a little rough, but I had sanded it down to smooth perfection before applying the gel stain! It's just a crazy wood with tons of character. I'm using a satin spar urethane to finish the tabletop. In the picture it's still wet, which is why it is so glossy. 

Anyway, the moral of this post is to embrace the imperfections in the furniture you acquire to refinish. And while you're at it, you might want to embrace your own imperfections and the imperfections in others. Your life will be happier for it!

Have a wonderful weekend!

Refinishing an Oak Pedestal Game Table... {Part 1}

Last year around this time I was on a quest to find a pedestal table to use as a game table in our loft.  I wanted a round table about 45 inches wide. I looked at new tables, but I was more interested in an antique solid oak table. I love these tables. In my mind they are so much prettier and made so much better than many of the tables they make these days. I was in the habit of looking on Facebook Marketplace every day to see if one would come on the market. Here's the table I finally ended up buying...

(Picture source: Seller)

This table was everything I wanted. Solid oak. Beautiful craftsmanship. Forty-two inches wide and in as good a condition as an old table could be. The best part is this table cost only $50. Fifty! I had been looking at tables that were anywhere from $1000 (veneer) on up (solid wood), so this was a find of monumental proportions. So happy! I don't have any idea how old this table is, but the base of the table is very different than many pedestal tables. Usually the pedestals are curved. This one has very straight lines and looks a little art deco (1925 to 1940) to me. Any ideas about how old this table might be?

Well, yesterday I finally got around to starting the refinishing of this beautiful piece. The tabletop was in very good condition, but it had a light honey oak finish. I wanted something darker. I used Zep All-Purpose Cleaner and Degreaser to clean the surface of the table before painting on the Citristrip to strip off the stain and varnish. The surface of this table didn't strip off as easily as other tables I've refinished. It took two applications of Citristrip and a lot of sanding to get it down to the natural wood. After stripping the wood I used Klean Strip Paint Stripper After Wash to clean off all traces of the stripper. All of these products can be found at Home Depot or Lowe's. Here's a photo of the table with the first Citristrip application...

The Paint Stripper After Wash leaves the piece a little wet, so I let it dry overnight and put it outside in the sun this morning to make sure it was totally dry before I started sanding...

Later, I used a little elbow grease and sanded the surface with my orbital sander. I used 120 and 220 grit sanding paper. Once it was sanded and cleaned again, its beautiful character started to shine through! I noticed, of course, the different striations on the wood. I did a little research and found this wood was quarter sawn. 

I'm used to seeing plain sawn wood which creates a "cathedral" pattern in the grain. (The grain starts and travels up to a peak and down again.) Quarter sawn gets its name from the fact the log is cut into quarters. "This cut features annual growth rings at a 60 to 90 degree angle. This creates a visually appealing, somewhat tight vertical grain pattern, often with dramatic flecking." It was fun to learn something new...

 (Source: Schenck and Company)

This afternoon I applied some Minwax Gel Stain in Hickory to the piece. It's beautiful! Here is half with the gel stain and the other half unfinished. I love how the darker stain makes the grain of the wood more obvious...

I absolutely love this dark brown hickory color on oak. I used this same color for my dining room table when I refinished it, and we've loved it. Tomorrow I will finish the top of the table by applying a couple/few coats of Spar Urethane. I plan on painting the bottom of the table, so you'll have to come back to see that process.

Wishing you a wonderful day!

Refinishing an Oak Table...

When we moved to Massachusetts, we decided to rent an apartment at first. We didn't know exactly where we wanted to live, so we decided to research the lay of the land before we bought a home. I thought it would be only a few months before we found a home, but we ended up deciding to build, so here we sit still in the apartment ten months later. We should move into our home in about two months. Here's the  dreamy view we will have out our kitchen/eat-in-nook in our new home. {It's dreamy not because of the workers, but because of the trees. 😁 Although, I'm sure the workers are "dreamy" to someone -- just not me.}

Anywho, one of the things I've really missed about being in a home is being able to spread out and work on a big project. I've been able to sew, but that's about it. I am itching to refinish a piece of furniture, so I've been looking for a particular project to work on soon after we move into the new house. I found it the other day.

We have a loft in our new home. Part of it is a "bridge," with railings on either side. In the model home they had a grand piano there. My seven years of piano lessons never "took," so that's not an option. It's a tricky space to figure out what to do with. Here's a picture of how the space looks now. These railings, of course, are temporary so workers don't fall off the side... (Although, these rickety railings wouldn't keep anyone from a serious tumble.)

At the end of the room we'll have a couch and TV area, but I've been trying to figure out what to do with the space in the foreground. We finally decided to put a game table and chairs in the area. It's plenty wide, and we enjoy playing games in our family, so I think it will work beautifully.

For the last month I've been looking at tables. I wanted a round pedestal table about 45 inches wide. I looked at new tables, but I was more interested in an antique solid oak table. I love these tables, and they are beautiful. I was in the habit of looking on Facebook Marketplace every day to see if one came up and finally last week I came upon one just 30 minutes from our place. I quickly messaged the woman and a couple days later we picked it up. This is her picture, and it doesn't do it justice, but you'll get the idea...

This table was everything I wanted. Solid oak. Beautiful craftsmanship. Forty-two inches wide, and in as pristine condition as an old table could be. The best part of this little project is this table cost $50. Fifty. I was so thrilled! I had been looking at tables that were anywhere from $1000 (veneer) on up (solid wood), so this was a find of monumental proportions. So happy!

I want to refinish this table to give it back some of his former glory, but I have a dilemma.  Do I refinish him with a gray stain, something like this...

or a dark walnut stain, like this...

Either finish would be beautiful.
I'm curious.

Which finish do you like better?

Update: Someone asked for a picture of the flooring and asked about the color of paint on the wall. Here's the flooring (the wood on the left) and the paint color leans toward an off-white color.

Children's Ice Cream Shop... the big reveal!

A few weeks ago on a blog post I mentioned that I had bought a used TV stand to repurpose into an ice cream shop for children. I finished it shortly after that post and it's time for the reveal. You might remember that I talked the cashier at the thrift store down to $5 for this "beauty." {I'm embarrassingly cheap when it come to repurposing items.}

Here are the steps it took to repupose this TV stand into a fun treat shop for the grandkids...

1. I disassembled it -- the top, kick plate, knobs, and cupboard doors all came off.

At this point, the back of the TV stand became the front of the ice cream shop, so when I refer to the "front" and "back" I am referring to the front and back of the new ice cream shop.

2. I applied a coat of Kilz Original Oil-Based Primer on all the pieces.  I also bought a piece of hard board and cut it to size for the front of the ice cream shop. {There was no "back" on the TV stand before.}

3. I used Behr "One to Remember" and Behr "Misty Isle" to paint the shop. These are beautiful colors reminiscent of peach and mint chocolate chip ice cream -- perfect for the little shop.

4. When the pieces were painted, I reassembled the stand -- turning the top around to the (now) front of the ice cream shop and placing the kick plate on the front of the shop. The hard board was also put on the front of the shop. New knobs were placed on the cupboard doors.

5. I bought two 1-1/4" x 48" round dowels at Home Depot. Two round holes were drilled in the top of the shop. I also cut two 2-1/2" cubes and drilled a hole through both of those. They were glued to the inside of the shop to help secure the bottom of the dowels. {See below.}

6. Strips of cotton were cut 1-1/2" x 16" to make the fabric banner. It was strung across the dowels.

7. A cute ice cream sign was purchased from Amazon to add to the front of the shop.

8. Two "Melissa & Doug Ice Cream Scoop Sets" were purchased. This magnetic play set makes it easy for little ones to scoop up the ice cream and place it on the cones!

The result was more than I'd hoped for... 

The ice cream shop was revealed at our family reunion. It was my hope the little ones would enjoy playing with something new. It did not disappoint...

It was especially fun when the adults got into it and ordered real ice cream from the kiddos. 

From a junkie old TV stand to a fresh new children's ice cream shop, this repurposed item was one of my favorites of all time!

My thanks to Mindi, at My Love 2 Create, for inspiring this project with her Frozen Treat Stand!

And one more thing... aren't my grandkids adorable!?!